McCulloch chain saw Manual del operador Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 26
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
24 – English
MAINTENANCE
1153988-26 Rev.3 2012-03-09
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section.
Daily maintenance Weekly maintenance Monthly maintenance
Clean the outside of the machine.
Check the starter, the starter cord
and the recoil spr
ing.
Check the brake band on the chain
br
ake for wear. Replace when less
than 0.6 mm (0,024 inch) remains at
the most worn point.
Check that the components of the
throttle control w
ork safely. (Throttle
lockout and throttle control.)
Check that the vibration damping
elements are not damaged.
Check the clutch centre, clutch drum
and clutch spr
ing for wear.
Clean the chain brake and check that
it oper
ates safely. Make sure that the
chain catcher is undamaged, and
replace it if necessary.
File off any burrs from the edges of
the bar
.
Clean the spark plug. Check that the
electrode gap is 0.5 mm.
The bar should be turned daily for
more e
ven wear. Check the
lubrication hole in the bar, to be sure
it is not clogged. Clean the bar
groove.
Clean the carburettor compartment. Clean the outside of the carburettor.
Check that the bar and chain are
getting sufficient oil.
Clean the air filter. Replace if
necessar
y.
Check the fuel filter and the fuel
hose. Replace if necessary.
Check the saw chain with regard to
visible cracks in the rivets and links,
whether the saw chain is stiff or
whether the rivets and links are
abnormally worn. Replace if
necessary.
Empty the fuel tank and clean the
inside
.
Sharpen the chain and check its
tension and condition.
Check the
drive sprocket for excessive wear
and replace if necessary.
Empty the oil tank and clean the
inside
.
Clean the starter units air intake. Check all cables and connections.
Check that nuts and screws are tight.
Check that the stop switch works
correctly
.
Check that there are no fuel leaks
from the engine, tank or fuel lines.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26

Comentarios a estos manuales

Mandlenkosi Khumalo 30 Aug 2024 | 11:59:04

I just wanted to know how to tighten ir adjust the loose chain and also to ask the correct oil type of Maculloch 320 chain saw.